Upgrade Samsung Galaxy Sl (i9003) to i9003XXKPH (Gingerbread)

More stable than previous firmware (i9003XXKPE)!!!

Don't forget to download the i9003XXKPE, because some files will be used again...
1. Download this file first http://hotfile.com/dl/127060598/1e1f7a3/I9003XXKPH_I9003XXKPH_I9003SERKPH.rar.html (*Password is samfirmware.com)
2. Unrar that file, and you should find Odin3_v1.83, open that file.
3. Check Re-Partition, Auto Reboot, and F.Reset Time.
4. Click PIT button and select this file: latona_20110114.pit
5. Set your Galaxy to download mode : Press Volume down + OK, then hold Power button.
6. Connect USB cable and the program will detect the phone's Com number.
7. Click Start button to download the PIT file to phone.
8. After it is Done Click on Reset button.
9. Click PDA button and select this file: CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
10. Click PHONE button and select this file: MODEM_I9003XXKPE_REV_00_CL1041909.tar
11. Click BOOTLOADER button and select this file: APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
12. Click CSC button and select this file: GT-I9003-CSC-MULTI-OXAKPE.tar
13. Unplug usb cable, remove battery, insert battery and bring it back to download mode. Then connect USB cable again.
14. Click Start button to flash these files to phone.
15. Do not touch anything till you see PASS on the program window.
16. Turn the phone off, and go to download mode again.
17. Back to Odin, press Reset button.
18. Select file I9003XXKPH_I9003XXKPH_I9003SERKPH_HOME.tar as PDA, and click start to flash the rom. Wait until finish.
19. Factory reset.
Continue Reading...